Stock horn goes through a relay, I used a wire clamp below the stock connector and a spade lug on the other end for the horn. For the ground I attached a crimp ring big enough for the mounting bolt and a spade lug to the horn. So it still uses stock relay and fuse. Stock connector still there if I want to ever go back to stock( I won't but maybe a future owner would).

Click on image to enlarge

	Front clip removed to upgrade stock horns
	Hella Supertone installed right side.
	Nose removed to get to the horns.
	Stock horn left side.
	Stock horn right side.
	Stock horn compared to Hella supertone.
	New horns installed, sound sooooooooooo much better.

<<< BACK