Just installed the coilovers after months on months of sitting on them in the garage collecting dust. Overall, quality is good. Craftsmanship is also well executed except for the dappening adjustment knob.
No air tools the complete job took me 2.5 hours. I'd say with air tools, this can be done in less than an hour. I had a seized impact gun for those curios.
Ride quality is hands down way better than the H&R springs. I adjusted the rear setting to 15 stiffen it up a bit and set the front to 22. Originally I took the threaded collar off the rear but realized it was a bad move because I barely got any camber out of the front when I matched the height and surely I would rip my fender up. Instead I placed the collar back with only 1 ring nut and got about 1/2" to spare. The fronts went back up to 1" since I've had Megan's before and they settle about 1/2".
Test drive was good, no creaks, and now I will get an alignment once springs settle. Without any more delay here is the some of the shots I took.