Honda Odyssey Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. 2011 - 2017 Odyssey
    Hope someone can help. I am am looking to avoid spending $800-900 to replace my headlight. I have a 2011 Touring Elite model. Love this can! The low beam went out on the driver side a few days ago. My headlight assembly says do not remove this cover over the top of where the low beam is. I...
  2. 2011 - 2017 Odyssey
    Filled up my van this morning right before going in to work . When I got back in the van to go home I drove a few miles and the “check emissions system” light came on. Went to the auto parts store and used their scanner, it came up with P0175 & P0172. The van has been muzzled for the past 4...
  3. 2011 - 2017 Odyssey
    When first starting the van, it behaves as if first gear wants to be engaged when at a full stop. When at a stop sign, it's urging to go forward as if first gear is engaged. If I let off the brake, it crawls forward extremely fast and gets angry when I bring it to a full stop. It goes away...
  4. Buy/Sell/Trade
    1360CAD when new with tax. Only used 10000km, 11 of 13/32’’ original thread depth remain – the 8mm indicator is still completely visible on al 4 tyres. Asking 700$, negotiable. Pick up only (Montreal).
  5. 2011 - 2017 Odyssey
    Just have a question about the headlights in my 2014 TE. The low beams are HIDs, but what I’m confused about is that everything I have read says the DRLs and the high beams are the same bulb. There is only one filament in the 9005/HB3. So just trying to get some knowledge on this because I would...
  6. 2011 - 2017 Odyssey
    Can the HIDs be swapped to LEDs in my TE? If so any recommendations
  7. 2011 - 2017 Odyssey
    New here and new to the Honda family, looking for a recommendation for a very bright LED back up light swap for my odyssey.
  8. 2011 - 2017 Odyssey
    Brought it in to our local dealer after reading and re-reading the owner's manual several times making sure I was doing everything properly. Setting position 1 always works smoothly and easily, but while position 2 button blinks when the set button is pressed and held it does not respond to...
1-8 of 8 Results