Honda Odyssey Forum banner

1 - 14 of 14 Posts

·
Registered
Joined
·
302 Posts
I have these in 18" on mine with a 35 offset.

You will need hubcentric rings that cost around $10 for the ody. 64.1mm to 72.5mm

And you will need 14mmx1.5 conical lugs










 

·
Registered
Joined
·
158 Posts
OUZO Power said:
I have these in 18" on mine with a 35 offset.

You will need hubcentric rings that cost around $10 for the ody. 64.1mm to 72.5mm

And you will need 14mmx1.5 conical lugs



You happy with them so far?
 

·
Registered
Joined
·
302 Posts
yup. very happy with them. They look fantastic and don't scream aftermarket. They even fit the OEM H caps.

I love to mod my cars. But try to keep it as factory looking as possible.

I love the 19's but tire options are very limited, so I settled for 18's.
 

·
Registered
Joined
·
158 Posts
OUZO Power said:
yup. very happy with them. They look fantastic and don't scream aftermarket. They even fit the OEM H caps.

I love to mod my cars. But try to keep it as factory looking as possible.

I love the 19's but tire options are very limited, so I settled for 18's.
Yeah, I like keeping the look similar to stock. I think anything too flashy and wild will just encourage theft. I wanted the MDX sport wheels, but I think I'll like these better.

So, I'll be going with the wheels like yours, but in 19":

http://cgi.ebay.com/ebaymotors/19-W...rQ5fTruckQ5fPartsQ5fAccessories#ht_3541wt_814

Probably these tires:

http://www.tirerack.com/tires/tires...ireModel=Eagle+GT&partnum=445WR9GTXL&i1_Qty=4

And, where do I get the hub adaptor and the new wheel nuts? Do you have a link to the correct items?
 

·
Registered
Joined
·
665 Posts
Be careful with 19s. Thats approaching noisy low profile lose traction on the bumps size.
 

·
Registered
Joined
·
302 Posts
gregersonke said:
Be careful with 19s. Thats approaching noisy low profile lose traction on the bumps size.
It really comes down to the tire itself.
 
1 - 14 of 14 Posts
Top