Honda Odyssey Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
230 Posts
Discussion Starter · #1 ·
Hi everyone
i have taken an interest on these wheels lately and i was wondering what you guys think about them on the 01.

Or has anyone done it already??

there is a local person selling some rdx wheels for $600 no tires obo and im debating if or not to get them..

i photochopped a van same color as mine to see what it looks like..

put on the wheels and dropped it...


lmk C&C welcomed

thx
 

·
Registered
Joined
·
157 Posts
19" tires are quite expensive - 18 & 20" tires are cheaper and have better sizing......look at the prices 1st! my .02
 

·
Registered
Joined
·
230 Posts
Discussion Starter · #3 · (Edited)
19" tires are quite expensive - 18 & 20" tires are cheaper and have better sizing......look at the prices 1st! my .02
Thx for the .02 but right now it's not an issue.. Had 18s didn't like the way the looked kinda on the small side for my taste and 20s are just way too big for my taste (seen them on other odys). 19s will be my sweet spot.. Tire size may be 40s or 45s. Then I'll be asking you guys what's the best lowering springs available for the van. Looking for 1.5"f 1.2"r..
 

·
Registered
Joined
·
37 Posts
http://uswheelexchange.com/index.php?page=shop.product_details&flypage=yagendoo_VaMazing_1.tpl&product_id=718&category_id=47&manufacturer_id=27&option=com_virtuemart&Itemid=4

hello,
i have a set of these which came off a 2010 Range Rover. I had them powder coated black for my Gold odyssey, but am in a tight spot and unable to pay for the tires.
I need to sell these rims. try em on via photoshop and let me know if you are interested. I can let em go for $1500

hope you dont mind me contacting you.
 

·
Administrator
Joined
·
14,960 Posts
uswheelexchange.com - 19" Land Rover Range Rover Sport

hello,
i have a set of these which came off a 2010 Range Rover. I had them powder coated black for my Gold odyssey, but am in a tight spot and unable to pay for the tires.
I need to sell these rims. try em on via photoshop and let me know if you are interested. I can let em go for $1500

hope you dont mind me contacting you.
That would be the wrong wheels for a 2001 though as 2001 has a different bolt pattern than your 3rd gen.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top