2002 ody power windows module reset

17488 Views 11 Replies 5 Participants Last post by Buffalo4, Jul 30, 2015

reefguy

Discussion Starter · Jul 15, 2010

Has anyone successfully reset their power windows module after replacing passenger window motor regulator, because the passenger side switch does not work up/down,
The master switch drivers side switch only works up and no down, anyone else had this type problem and how did you get it to work? After doing some reading and searching, the power window moduel needs to be reset, but I do not know the location of it. Thanks..

Save

1 - 3 of 12 Posts

Buffalo4

· #9 · Jul 30, 2015 (Edited)

I saw somewhere during a Google search the exact problem you are having with your window. Goes up to the top and then comes back down several inches. You have a 2003 Ody, is that correct?
I don't remember where it was, but I'm sure you can find it. No, I don't remember if the fix was easy or not.

Buffalo4
PS: Another method to try: 1. Turn the ignition switch to ON (II). 2. Move the power window all the way down by using the power window DOWN switch. 3. Open the driver's door. NOTE: Steps 4-7 must be done with 5 seconds of each other. 4. Turn the ignition switch to LOCK (O). 5. Push and hold the power window DOWN switch. 6. Turn the ignition switch ON (II). 7. Release the power window DOWN switch. Repeat Steps 4-7 three more times. 8. Wait 1 second. 9. Confirm the AUTO UP no longer works. If AUTO UP still works, go back to Step 1. 10. Move the power window all the way down using the power window DOWN switch. 11. Pull up and hold the power window UP switch until the power window is all the way up, then continue to hold the switch for 1 second. 12. Confirm that the power window control unit is reset by using the power window AUTO UP & AUTO DOWN function.

See less See more

Save

Buffalo4

· #10 · Jul 30, 2015

Save

Buffalo4

· #12 · Jul 30, 2015 (Edited)

The long procedure is supposed to erase the up/down stored memory .
Yes, it is for a later yr Ody, but I thought I would throw it out there.

The three times thing is to make sure the memory is gone, and then you do the re-learn method that is in the manual.
If I find some other thing to try , I will post back.
Almost looks like the 'safety' feature is working improperly: the one where the window will stop going up if something is in the way, like your hand, etc.
Buffalo4

Save

1 - 3 of 12 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month