Honda Odyssey Forum banner
1 - 2 of 2 Posts

· Registered
48 Posts
Discussion Starter · #1 ·
I need to replace the entire passenger side mirror assembly.

Here is what I did so far..I looked through the forums and am still not clear..

I took the plastic plate from the inside of the passenger door off and it reveals three screws that need to be loosened. The screws are very tight, I may need a socket. It also shows the wire going into the door side panel and that is where the connector is located.

My question is if I get a socket and loosen the screws, and pull the mirror assembly will the connector some up so I can connect the new mirror to it OR does the door side panel need to be removed to reach the connector?

Appreciate a reply soon.

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.