Honda Odyssey Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
The driver's side sliding door closes and seals fine, however, the back side of it sticks out about 1/8". I have looked through all the threads and found no solution. I tried the reset, and that did not fix it. Also, there is a squeak coming from the door any time we go over bumps. Any ideas?
 

·
Registered
Joined
·
3,163 Posts
Inspect the door for broken or missing rollers. Adjust the striker. The rear edge of the door should stick out .5mm(.02 in) It is advisable if you plan on doing your own work on the door or rest of the van to get an OEM service manual. The door mechanics are complicated.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top