Honda Odyssey Forum banner
1 - 3 of 7 Posts

· Registered
3 Posts
Discussion Starter · #1 ·
Hey y’all! I’be just replaced the middle rollers on my 09 sliding doors. The cable on the driver side got sucked in so I had to tear into the paneling.

Current problem: I had tried to pull on the door handle to open the door, (this is when the cable got pulled into the motor causing it to jam) the van gave a long 10 second beep and now that I have it all back together there is no response at all.

I have pulled the #7 fuse.

Currently at a loss as to where the problem is.

thank you in advance
1 - 3 of 7 Posts