Honda Odyssey Forum banner
Cancel
Create thread New Garage Forums

Help finding windshield molding part #

Jump to Latest
7.2K views 5 replies 5 participants last post by  marcusdismas  
#1 ·
Hello! I’m hoping this forum can once again help me out :)

I have a 2015 Odyssey EX that I purchased as a certified preowned a couple years ago from a dealer in OR. Recently I got a crack in the windshield and went to replace it today and was told that apparently the van’s windshield molding clips were broken and the molding was glued on.

Color me not happy since I bought it certified preowned. Be that as it may, I now need to replace the molding and the clips. The business that installed the windshield offered to install them for me if I supplied the parts. I’m going to attach a picture of my van where the taped part is what I need to replace is this the correct part that I need?

Also, who do people recommend as an online source to order from? My local dealership wanted $202 for both pieces of molding and the clips.

Genuine OEM Honda Side Molding Part# 73152-TK8-A01 Fits 2011-2017 Honda Odyssey | Honda Parts Wholesale

2011-2017 Honda Odyssey OEM Honda Part # 73152-TK8-A01 - Side Molding: Up To 35% Off On Every Order And Guaranteed Fit When You Enter Your VIN
www.hondapartswholesale.com www.hondapartswholesale.com

Thanks!


Image
Image
 
#2 ·
Check the online dealers like Bernardi and Majestic. Also look on the Honda eStore, it allows you to compare prices at various dealers in your area.
 
owns 2006 Honda Odyssey EX
Save
Reply Quote Like Like
P
#5 ·
Also, don't leave that tape on your paint too long... I'd rather run without the moldings than leave the tape on there more than a few days.

-Charlie
 
Save
Reply Quote Like Like
#6 ·
yeah, gotta do the same on mine coz it appears the heat weld epoxy gets fatigued & brittle over time, & when it breaks, it breaks the clips too...but replacing (found the parts on ebay for about $50 delivered) might not be needed. as long as the whole of the clips are there, clear gorilla glue will work well enuf, & over the long term, better than the heatweld epoxy. that's what i'm gonna have done...along with taking down the rubber upper molding that came loose over the weekend in the 115f PHX sun. i'm not up for a $300 repair when a $5tube of CGG would prove as effective!!!
now the fun will be to get the white stickum from the ducktape off. 'goof off' i'm told.
 
Honda Odyssey Forum
posts
1.1M
members
432K
Since
2000
Odyclub community is the #1 forum to discuss all things Honda Odyssey: minivans, safety, service maintenance, mods, and more.
Full Forum Listing
Explore Our Forums
2005 - 2010 Odyssey 2011 - 2017 Odyssey 1999 - 2004 Odyssey 2018+ Odyssey Problems and Concerns