Honda Odyssey Forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
I have an '03 LX. The two lowest fan positions would not blow air, but the two highest ones would. Fan speed is controlled by routing the "low" side of the blower motor through a resistor pack that places various resistors in series with the selector switch.

Got a replacement resistor pack from NAPA. Standard Motor / Intermotor P/N RU334. About $70.

Enclosed is a diagram of the resistor pack and pin numbers.


1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.