[aroyvaljr84]

Good Day i just got an 01 honda odyssey and it has a little rod knock, i have a CL Type S j32a2 for my civic and i was wondering if there interchangeable and if it would fit. Till i fix the 3.5 ody engine and stroke it from a 3.5 to a 3.8. If there is any helpful information in this forum let me know and thanks

 

[mjody]

AFAIK nobody has tried this yet. The trans should bolt up as all J series V6 motors are similar. Experiment and report back.

 

[wreckedGT]

All j series are interchangeable. You will most likely need to swap the ecu and possibly harness as well. Check out the j37 in the new TSX. You could go to that and drop in 305hp on a reliable stock motor. That's my plan if my engine ever dies. you do need the ecu for a j37 swap because it has both intake and exhaust VTEC and not just intake like the j35.