Honda Odyssey Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Available from Dashpro real wood and simulated dash kits. Installation available in Los Angeles and Orange Couny, Ca.
Luxury package real wood is 445.00 and simulated is 395.00 installed.
Basic package real wood is 375.00 and simulated is 325.00 installed.
Non-installed kits are 75.00 off installed prices. Picture shown is simulated.
Dashpro 888-305-5786

<img src=http://albums.photopoint.com/j/View?u=218721&a=1618327&p=56695058&Sequence=0>
<img src=http://albums.photopoint.com/j/View?u=218721&a=1618327&p=56695807&Sequence=0>
 

·
Registered
Joined
·
156 Posts
How hard are the wood dash kits to install yourself? Do they require any changes , such as drilling holes, to install?
 

·
Registered
Joined
·
7 Posts
Discussion Starter #3
<font face="Verdana, Arial" size="2">Originally posted by indian:
How hard are the wood dash kits to install yourself? Do they require any changes , such as drilling holes, to install?</font>
Installation on of the dash is not to difficult as long as you take your time and dry fit all pc's to determine alignment of each pc before final placement.The key to installation is proper cleaning and to apply promoter solution(included)to all parts receiving wood pc's pryor to placement. The pc's must also be warmed slightly so they become flexible. This can be done by placing the pc's on the dashboard and running the defroster during the whole installation process. The wood is adhered to dash with double sided adhesive pre applied to the full back of each pc. All you have to do is remove the protective liner before placement. No drilling or modification is needed.


[This message has been edited by ODYWOOD (edited 11-25-2001).]
 
1 - 3 of 3 Posts
Top