Joined
·
1,447 Posts
If yours is an 02, then suck as much PSF as possible out of the brake fluid reservoir -- before you drive it!
There is a little "wall" inside the reservoir that separates the front compartment from the rear.
Use a syringe with a modified marinade-injecting needle (or small tubing) in order to reach the rear compartment and suck it empty.
Use lint free coffee filters to soak up as much fluid as possible from the interior of the reservoir, prior to refilling.
You might be able to separate the reservoir from the body of the master cylinder and remove it for cleaning. It is held in place by a bolt at the base and rubber grommets in the body of the cylinder.
There is a little "wall" inside the reservoir that separates the front compartment from the rear.
Use a syringe with a modified marinade-injecting needle (or small tubing) in order to reach the rear compartment and suck it empty.
Use lint free coffee filters to soak up as much fluid as possible from the interior of the reservoir, prior to refilling.
You might be able to separate the reservoir from the body of the master cylinder and remove it for cleaning. It is held in place by a bolt at the base and rubber grommets in the body of the cylinder.
