Honda Odyssey Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
I Finally had a chance to work on my odyssey today this his how we started
IMG_3935.jpg
View attachment 10594
cleaned the old spot welds in preparation for welding
IMG_3934.jpg
View attachment 10595
This are some of them this ones are main frame all clean
IMG_3936.jpg IMG_3937.jpg
View attachment 10596 View attachment 10597

Drilled the holes for the plugs welds and test fit the rad support

IMG_3939.jpg
View attachment 10598
Per the Honda manual I still need to do some destructive testing on my MIG plug welds before I do the final plug welds. I have to tack the rad support so I can test fit the hood fenders headlights grill and bumper cover to make sure all line up and then finalize the welds provably this Saturday if the weather allow, wind and good MIG welds are almost impossible.
 
1 - 1 of 1 Posts
Top