Honda Odyssey Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
26 Posts
I don't think you will find an interchangeable upper camber arm made for some other honda/acura. I'm sure you know that Cusco makes them but they are bux. Someone here (Boosted?) said that you can use the adjustable balljoints from the front of some Prelude (SH or Non SH, I forget) as the upper rear balljoint on an RA1. Try search for that.
 

·
Registered
Joined
·
725 Posts
if your looking for whole arm, you will need one from a odyssey.
if you are only looking for the adjustable camber use your stock control arm and replace balljoint with one from 97-00 prelude front ones.
 

·
Registered
Joined
·
26 Posts
if your looking for whole arm, you will need one from a odyssey.
if you are only looking for the adjustable camber use your stock control arm and replace balljoint with one from 97-00 prelude front ones.

There you go, this guy...overboostin posted this info a while ago. I thot there was something about it also being SH or Non SH?
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top