Honda Odyssey Forum banner
1 - 3 of 7 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Hey EE4LIFE,

thanks so much for helping me out. will try that tonight when i get home. couple of quick questions....(sorry for my Ignorance!)

1) step 3, how do i close the throttle fully?
2) what is the PCM/ECM and DTC's?

i'm learning a lot and i greatly appreciate your help!

Dave
 

· Registered
Joined
·
3 Posts
Discussion Starter · #7 ·
thanks so much guys. I checked and the vacuum house on the mount is connected. I didn't notice any cracking, so i think it should be good.

i did do the idle "learn" procedure and it did seem to help, not nearly as rough and starts a little easier. I plan on going through the suggestions again and removing the vacuum hose to see if their is any deterioration that i can't see from a quick look.

thanks again for all your help. I'll also check out the other site on the honda issues.

Much thanks!
Dave
 
1 - 3 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top