Honda Odyssey Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
96 Posts
I did both of mine. It helped to have the helms manual because you need to remove internal paneling and also relieve tension from cable connected to pulley on inside. Mark positions of current roller before removal. Remove door, remove old roller, attach new roller and replace door. Replace pulley cables and retrain the doors. Good luck either route. Just research.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top