Use the foil trick to read the code. If there is a slide door light, there is an associated B-CAN code.
Sliding Door Light
Hey guys,
My dash shows a sliding door light so the left sliding door does not open or close with the remote or side buttons on the driver's side. I saw some videos online and tried resetting the fuses. That works for a little bit but the door computer recognizes the error and the light appears back and the door stops working. I used a code reader that the control unit had low voltage, millimeter wave radar sensor error, CAN Communication failure, and sensor cluster failure.
My dash shows a sliding door light so the left sliding door does not open or close with the remote or side buttons on the driver's side. I saw some videos online and tried resetting the fuses. That works for a little bit but the door computer recognizes the error and the light appears back and the door stops working. I used a code reader that the control unit had low voltage, millimeter wave radar sensor error, CAN Communication failure, and sensor cluster failure.
1 - 2 of 4 Posts
Here's a timestamped link to the video that shows you how to pull the B-CAN DTC. Watch the video at 0.75 speed if needed since it is sped up:
1 - 2 of 4 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda Odyssey Forum
Odyclub community is the #1 forum to discuss all things Honda Odyssey: minivans, safety, service maintenance, mods, and more.
Full Forum Listing
Explore Our Forums
Recommended Communities
