Honda Odyssey Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
59 Posts
Discussion Starter · #1 · (Edited)
Hi all

Quick question =]

Been going through the net, many other cars with S.tech mentioned to cut off some bump stop in the instructions...and now I read the instruction again, it does mention to cut off the bump stop on the front for 35mm from the bottom, and 25mm for the rear (If my translation from japanese is correct :S) Anyone did this?

And would it actually lower the car more..? (I personally not sure about this, but many others said it will....)

Thanks
 

·
Registered
Joined
·
1,299 Posts
The bump stop they are cutting is the foam rubber stop that sits near the top of the shock. Just a razor blade will cut right through it.
Yes, if you cut it off your car will ride a little lower.
 
1 - 2 of 2 Posts
Top