Honda Odyssey Forum banner

Homelink and old 433mhz openers! I got it to work.

13K views 4 replies 4 participants last post by  dvpatel  
#1 ·
I could not get our new '08 Odyssey Homelink to work with our garage opener. Wife was very upset that our new vehicle couldn't do it!

Hence, my mission!

I searched the internet and read every instruction. None worked. Turns out our opener was a 1999 model Liftmaster that used 433mhz.

The homelink is good to 399mhz I believe.

I went to Home Depot (based on a post I read on a bmw forum) and bought a Chamberlain Universal Receiver. They claim to work with ANY old opener. So the steps were:

1. Unplug opener.

2. Attach wire to new Universal Receiver, and then to the opener.

3. Plug both in.

4. Press learn button on new receiver and use the NEW remote that comes with the receiver.

So, this new remote is under the 399 mhz, allowing me to program the Homelink in the Odyssey as per normal instructions.

Now it works, and my life is much better because my wife is very happy that she doesn't have an UGLY OLD GARAGE DOOR OPENER IN A NEW CAR!

I will never hear, "IT'S NOT FAIR THAT YOUR TRUCK OPENS THE GARAGE DOORS AND I CAN'T!"

Yeehaw!

Hope this will help others that had my problem, because there were NO clear instructions like this anywhere on the net.

Image


Image


Image
 
#3 ·
Bravo. This can help a LOT of folks as I know two friends whose GDOs are not compatible with the HomeLink. A local builder Ryland Homes has been using these Diamond brand GDOs that don't work with the HomeLink system. I bet they'd be over joyed.

:)
 
#4 ·
Works Good for sure - did the same thing with my old Caravan to operate our old ancient LIft Master - the units are also available at Sears under the Craftsman label...
 
#5 ·
brokenarrow said:
Works Good for sure - did the same thing with my old Caravan to operate our old ancient LIft Master - the units are also available at Sears under the Craftsman label...
They are available as LiftMaster label too at least that's what I figured when I was googling for pricing, I came across a site with the same unit as in the OP but with LiftMaster printed right where the Chamberlain is printed.

:)