[phreaktor]

Looks like the centerbore on the Ody is 70.3mm and the Maxima is 66.1mm, at least on this site that has a list of older models of both vehicles. So I HAVE to get rings or no? What wheels from other cars will fit your car?

Edit- it’s 72.5mm for the 2006 Ody.

Honda Odyssey Wheel Size and Specs

With the Honda Odyssey wheel size chart, users can quickly figure out the effects of changing the offset and wheel width. Start by entering your current bolt pattern, wheel width, and offset. Then specify the new wheel's width and offset to determine the clearance between the strut housing and...

wheelssize.com

66.1mm is correct for the 2018 Maxima.

Nissan Maxima Wheel Size and Specs

With the Nissan Maxima wheel size chart, users can quickly figure out the effects of changing the offset and wheel width. Start by entering your current bolt pattern, wheel width, and offset. Then specify the new wheel's width and offset to determine the clearance between the strut housing and...

wheelssize.com

Just because the center ore on the Maxima is smaller than the van, that doesn’t necessary mean the wheels have the same centerbore right? Especially if it uses rings? I don’t have them handy to measure them right now.

 

[phreaktor]

If the Maxima wheel-side centerbore is larger than 72.5mm, this may be a good candidate for a ring. That’s only a difference of 6.2mm, which a hubcentric ring on the Max would correct. Fingers crossed.

Sorry, I basically had an entire conversation with myself lol. Time to go measure the wheels.

https://www.amazon.com/dp/B08M94VDBD/ref=cm_sw_r_cp_api_glt_fabc_5S3AR8SBK7P8AXEGT9V9

 

[phreaktor]

So I just tried a test fit and it turns out the Ody has M14 wheel studs and the the Max wheels have holes for M12 smh. Does anyone know if M14 and M12 studs have the same size spline? Would this be a safe conversion?

 

[phreaktor]

What do you mean by "spline"? The 14mm x1.5 pitch threaded stud is wider in diameter than any 12mm stud regardless of pitch.

Did you actually measure your Odyssey hub centers? That's the small round part that fits into the wheel center. For the longest time, Odysseys have used 64.1mm. Given all of the weird figures on the web, you might want to just get a set of digital calipers and make sure.

Your Odyssey wheel bolt circle is 5 x 120mm. Same for every Odyssey built from the 2005 model year, and onwards. I think the 2018 Maxima is a 5 x 114.3mm, which is pretty standard for a lot of Japanese cars. This would be an automatic no-go for fitment.

That Maxima wheel has an offset of +50mm, same as the Odyssey ... but they would only fit 2004 and younger Odysseys.

OF

Google has the wrong bolt pattern then. The first result says 114.3. By spline, I mean the press fit portion of the stud, but that’s irrelevant if the bolt pattern is wrong. No, I didn’t measure. I just went by the links above. I did notice they appeared to be the same as the Maxima wheel centerbore though. Thanks.