Honda Odyssey Forum banner

2007 Odyssey EX-L - 20” wheels staggered - fitment issues?

9.6K views 13 replies 5 participants last post by  odyhaus  
#1 · (Edited)
Hey everyone!

Just came across a great deal on 20” wheels.

I really don’t want to pass these wheels up but if they’re going to definitely rub and cause issues, then I guess I’ll have to pass and wait til I find the right fitment.

Here’s the wheels + tires fitment info:
275/30ZR20 95 w xl (rear)
245/35ZR20 95 w xl (front)

Offset 35 front, 40 rear

20x9 front, 20x10.5 rear


Pleeeease tell me I can make these work. Even if I have to have the fenders rolled.
I was going to get H&R springs to lower/remove gap but if lowering will cause rub, I’ll sacrifice the springs.

I assume this would work based on this 2001 Odyssey:


Front: 20x9.5 +25
Rear: 20x10.5 +35

Front: 245/35
Rear: 275/35
 
#2 ·
With enough money, you can even have a dually setup in the rear. :D

I will wait for the other wheels experts to chime in but 10.5 in the rear may be way too much. The Ody is a HEAVY vehicle. Having different sizes means you are going to have to replace the tires a lot more often as the fronts are going to go bald. Have you factored that in to your math?

There are multiple 20" threads for the 3rd and the 4th gen and the rims are similar in both gens. You might want to go over those threads and hope and pray you find someone running the staggered rims especially the 9 and the 10.5 wide ones.
 
#3 ·

 
#5 ·
I assume this would work based on this 2001 Odyssey
There were significant body and suspension changes from Gen 2 to Gen 3. So Gen 2 comparisons may not be realistic for your Gen 3.
 
#12 ·
lol I’m in the Bay Area actually.

However, went with Tesla Model S 19” Slipstream wheels. Which are 19x8 +40. Hoping to mount them myself tomorrow or over the weekend. The seller said they’ve already been balanced prior to removing and replacing with some other aftermarket wheels for his Mode S.
 
#11 ·
Dayum. Sweet ride. Did not know 10s fit just fine (on air). Now I know.